Grippers and straightening tools

Autorobot Finland Oy

» Back

» Products and services » Bodyshop tools and equipment » Grippers and straightening tools

673 Chain 2,5 m

677 Double hook set

714A-1A Multi-purpose double gripper

The efficient double gripper is suitable for repairing the new, strong body structures. The great performance of the gripper comes from the large contact surface and from the two pairs of jaws that can be turned in the connecting plate so that they fit also curved edges. The double gripper can easily be divided into two separate grippers.

The double gripper is recommended for example for the very strong longitudinal pulls of the vehicle frame. It can also be used in the door and window support sets.

714A-4 Pull plate for two 714A-6 grippers

714A-6 Gripper for multiple pulling angles

The multi-purpose gripper is a very efficient and versatile tool. The pulling ring of the gripper turns 180°, which always provides an ideal pulling angle for the damaged points. The large operational area also enables simultaneous pulls in two directions.

The gripper can be utilized for lateral, vertical and lengthwise straightening in all parts of the vehicle body. It can be attached on the edges of the frame structure, and the door and window openings.

90-degree pulling angles can be created with the help of the pull plate delivered with the gripper. The plate works also as an independent tool when repairing the vehicle B and C pillars, hoods etc.

The multi-purpose gripper can easily be changed into an efficient double gripper.

716+1 Cylindrical fasteners for McPherson

738 Safety sling

Safety sling No. 738 is placed between pulling chain and damaged vehicle (as in picture) or between chain and straightening bed. This prevents damage to surrounding areas in case of gripper or attachment point failure. Safety instructions marked on the straightening tower and in the manual must always still be followed.

C9 Universal pulling hook 6 tons

DCH Chain shortener, 6 tons

G Gripper, 4 tons

H2 Pull arch horizontal, 320 mm

H4 Pull arch vertical, 180 mm

H28 Gripper, 5 tons

H29 Gripper, 3 tons

H31 Gripper + pull ring, 5 tons

H34 Multi-hole pulling tool

H34 is a pulling tool for straightening frame housings, inner fenders, etc. Multi-hole design makes it possible to attach to the fastening points of bumpers on several auto makes.