Autorobot Finland Oy

» Back

Chassis fasteners

» Fastening chart for vehicles without pinch weld and for full frame vehicles (pdf-file)

Chassis fasteners - Vehicle fastening and support - Autorobot

162+1C Additional fastening set for 162 and 162+

Chassis fasteners - Vehicle fastening and support - Autorobot 162+1C complements chassis fasteners Nos. 162 and 162+ that have an M20 thread on the side. The additional 162+1C fastener can be adjusted to three different lengths: 160, 200 or 240 mm. It can remain fixed on the sill clamp during vehicle mounting or be attached after the vehicle has been set in the sill clamps. If both sides of the 162+ are extended with an additional 162+1C fastener, a total extended fastening length of 680 mm can be achieved, larger than any of our competitorsí fasteners. Using the 162+1C does not interfere with the measuring bridges as they move under the fasteners.
Chassis fasteners - Vehicle fastening and support - Autorobot

650C+ Starblock basic kit (incl. 4 x 682A)

» See table for vehicle specific fasteners
Chassis fasteners - Vehicle fastening and support - Autorobot

650C-6 Fastening set, BMW 500

Chassis fasteners - Vehicle fastening and support - Autorobot

650C-7 Fastening set, Rover

Chassis fasteners - Vehicle fastening and support - Autorobot

650C-8 Set of shim plates BMW Z3 1996 -

Shim plate set No. 650C-8 is needed between fastening set No. 650C-6 and attachment point on BMW Z3 (model years 1996 -) to compensate for the slant in the rocker panel at attachment point.
Chassis fasteners - Vehicle fastening and support - Autorobot

650C-9 Fastening set, MB Type 108

Chassis fasteners - Vehicle fastening and support - Autorobot

650C-10 Fastening set, MB Type 203

Chassis fasteners - Vehicle fastening and support - Autorobot

650C-11 Fastening set, Audi A2

Chassis fasteners - Vehicle fastening and support - Autorobot

650C-12 Fastening set, BMW X8

Chassis fasteners - Vehicle fastening and support - Autorobot

650C-13 Chassis fastening set for Renault

650C-13 Renault chassis fasteners are adapters designed to fit Starblocks No. 682A (4 pieces). The same basic components (A) and (B) also form the base of Nissan fastener set No. 650C-14, as well as other fasteners designed for a few special vehicle models. 682A Starblocks make mounting quicker and keep the vehicle chassis mounted in the fasteners during underbody pulls.
Chassis fasteners - Vehicle fastening and support - Autorobot

650C-14 Chassis fastening set for Nissan and Renault

650C-14 Nissan and Renault chassis fasteners are adapters designed to fit Starblocks No. 682A (4 pieces). The same basic components (A) and (B) also form the base of Renault fastener set No. 650C-13, as well as other fasteners designed for a few special vehicle models. 682A Starblocks make mounting quicker and keep the vehicle chassis mounted in the fasteners during underbody pulls.
Chassis fasteners - Vehicle fastening and support - Autorobot

650C-15+1

Wheel stands of mounting kits (4 pcs), Renault Megane & Clio, Nissan Micra & Note
Chassis fasteners - Vehicle fastening and support - Autorobot

650C-21

Fastening set for Audi A8
Chassis fasteners - Vehicle fastening and support - Autorobot

650C-22 Fastening set, Cadillac XLR

Chassis fasteners - Vehicle fastening and support - Autorobot

669B+ Chassis fastening set for full-frame vehicles

669B+ fastening set is designed for full-frame vehicles. It includes four pieces of 682A+ Starblock fasteners, Autorobotís innovative fastening technology unparalleled in the industry. Starblock technology makes vehicle fastening and straightening much quicker. This is due to the free movement of Starblockís straightening arm (A), making length and pivot adjustments fast. Four fasteners also make mounting long pickups quicker.

Chassis fasteners - Vehicle fastening and support - Autorobot

It should be noted that in this 669B+ set, 682A+ Starblock is the basic fastener, and the set includes additional pieces to adapt Starblocks to a wide range of vehicle mounting situations. This set provides the versatility needed to mount, straighten and support most full-frame vehicles.

This set is designed for Autorobotís new-style straightening beds, which have eight sill clamp beams. Please note: The set can only be used with older model beds when the moveable sill clamp beams are changed to new-style beams.
Chassis fasteners - Vehicle fastening and support - Autorobot

669B-1

Pick-up mounting heads for Starblock (669B+, Star 650E+)
Chassis fasteners - Vehicle fastening and support - Autorobot

669B-29 Corner bracket set

Chassis fasteners - Vehicle fastening and support - Autorobot

669B-45 Additional set for 669B, Nissan Patrol GR

Chassis fasteners - Vehicle fastening and support - Autorobot

Frame Fastener 669B-51C for cross-country vehicles, multipurpose vehicles and vans

Chassis fasteners - Vehicle fastening and support - Autorobot

The new chain fastener clamps the monocoque frame section, and presses it slightly inwards (Picture A, Point 3).

With the traditional frame type vehicles a chain is fastened additionally around the frame beam to support the clamp (Picture B). The special feature of this new equipment is that it enables a grip of the car body by tightening the screw 1 (Picture B, Point 2) while the same movement simultaneously tightens the chain (4) around the frame structure.

The chain fastener is installed to the basic Starblock arm (5) where the height can be adjusted with spacers (6) for different car bodies.
Patented.
Chassis fasteners - Vehicle fastening and support - Autorobot

669B-52+ Adapters (4 pc) for 669B-1

Chassis fasteners - Vehicle fastening and support - Autorobot

682A+A8 Audi A8 mounting heads for 682A-series fasteners

Audi A8 (available only for authorized A8 body shops)

Chassis fasteners - Vehicle fastening and support - Autorobot

683-1 Fastening set

Chassis fasteners - Vehicle fastening and support - Autorobot

683-1-1

Gripper beam